MochiiTracer · Protogen OS

Install the firmware on your protogen or primagen

Put MochiiTracer on the head's Teensy 4.0 straight from your browser, with nothing to install. It takes four steps.

Chrome or Edge on a computer

You can't brick it

On Linux? Install the udev rule

 

curl -fsSL https://www.pjrc.com/teensy/00-teensy.rules | sudo tee /etc/udev/rules.d/00-teensy.rules >/dev/null
sudo udevadm control --reload-rules && sudo udevadm trigger

Show the rule file 
# /etc/udev/rules.d/00-teensy.rules  (PJRC)
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04*", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789a]*", ENV{MTP_NO_PROBE}="1"
KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04*", MODE:="0666", RUN:="/bin/stty -F /dev/%k raw -echo"
KERNEL=="hidraw*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04*", MODE:="0666"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04*", MODE:="0666"
KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="013*", MODE:="0666"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="013*", MODE:="0666"

The original file on pjrc.com

  1. Choose the firmware

    Species
    Firmware language

  2. Put the Teensy in bootloader mode

    Didn't work? Use the Teensy's button

  3. Connect the Teensy

  4. Install

Serial console (optional)

Face
–
Brightness
–
Temperature
–
Language
–
FPS
–
Brightness
Head language
Requires firmware v1 or newer.